
Upgrade Your Snorkel – Silence the Noise, Boost the Performance, Maintain Aesthetics
Meet the Ram air 4" Quiet-Flow Snorkel Head, engineered for drivers who demand more than just airflow but who want to maintain performance without the annoying intake roar. Designed with advanced acoustic-dampening and air flow channeling in mind, this innovative ram head significantly reduces intake air noise, giving you a smoother, quieter driving experience without sacrificing power.
But it doesn’t stop at quiet—this snorkel head is built for efficient, high-velocity airflow, delivering real benefits you can hear and feel.
If you already have or are looking to put a 4'' inch stainless snorkel on your 4wd and do not like the intake noise in the cabin then this is for you. You are more then likely aware of the pesky intake noise resulting from turbulence and harsh resonance. This is a side effect with installing these types of snorkel systems and they essentially become an echo chamber, Previously you would have needed to put up with the noise, however that is no longer the case and this is your solution.
We manufacture our snorkel head to deliver cleaner, more consistent airflow straight into your intake system. The result?
-
Reduced induction roar for a more refined cabin sound
-
Improved throttle response thanks to optimized air velocity
-
Better filtration efficiency by lowering dust swirl, turbulence and water entry
-
Enhanced engine performance in both on-road and off-road environments
This Snorkel Head is made to take on extreme weather, river crossings, and rugged tracks while maintaining peak airflow and protection.
If you’re looking to upgrade your snorkel system with something smarter, quieter, and performance-driven, our easy fit 4'' inch snorkel head is the clear choice.
Hear less. Breathe better. Drive stronger.
Whether you're touring, towing, or tackling technical tracks, the Air Ram 4" Quiet-Flow Snorkel Head gives your vehicle the quiet strength it deserves.
Upgrade your airflow. Enjoy the silence.
We manufacture our snorkel head as 2 separate precision pieces that interlock together. This design is unique allowing us to offer higher quality details, features and refinement. This is a true 4''inch Ram air snorkel head, ready to mount to your 4'' inch stainless snorkel.
Injection moulded from an ultra tough, heavy-duty, UV-stabilized nylon and fibreglass blend to ensure it is more then strong enough and still retain some flexibility for the mounting/clamping area and impact absorption.
Ram air has many benefits over a rear facing snorkel head, however something both styles can struggle with is water entry.
With that in mind, when your vehicle is left out in the weather our snorkel head is designed with a larger top section creating a ''roof'' and with an angle on it to encourage any rain water to simply drip off it and not enter inside the snorkel.
When your driving your vehicle, we have gone overkill on the water drainage aspect, starting off with a large open grill face collecting a large steady volume of air then the grill fins have a slight pitch, the increased airflow and fin pitch results in water droplets going to the rear of the snorkel head body where there is an internal funnel system channeling the water to a large drainage point just above the mounting base clamp, the water then exits out before going down the snorkel tube.
The Ram air effect solves most of the noise issue for us, through a simple effect, imagine trying to talk to someone with wind blowing directly at you the sound waves are suppressed and disrupted, as opposed to facing the other direction and talking down wind the noise is carried. As the noise or echo is carried out the snorkel head it is met by the ram air pressure coming in, effecting a large reduction in inside cabin noise.
The material blend is the next contributor towards suppressing sound and absorbing vibrations that produce sound. Nylon/fibreglass blend is much better then stainless steel at handling sound waves.
We didn't seek to make this product to a price point, we wanted to deliver a high quality product that actually worked. We are very proud to say this product has been designed, developed, tested and manufactured in Queensland, Australia, with multiple years of testing in a variety of conditions.
Installation is easy, cut the rear facing section of your current 4''inch stainless snorkel off and slide this down over the top and tighten the clamp. Please note this product only works on vehicles with a drivers side (Right Hand) snorkel. This is due to the ''angles'' already built into the snorkel head design that counteract the A and B pillar angles against the centerline of the vehicle.
Designed for universal fitment to most makes and models with a drivers side 4'' inch stainless snorkel.
Considerations
This is for drivers side (RH) 4'' stainless snorkels ONLY
The snorkel itself is NOT included.
Please check how your current snorkel is mounted to the A pillar on your cab as you will need sufficient room or material to cut off the snorkel in order to install this snorkel head and maintain aesthetics.
For best results it is beneficial to couple this with our internal snorkel insert that works much like a resonator in an exhaust.
What you will receive
1x 4'' ram air snorkel head (black), comes in 2 pieces that you will clip together
1x Powder coated black constant tension aeroflow hose clamp to suit
Proudly manufactured in QLD
** Current estimated lead time of 2 weeks before dispatch**